Fully Tested
We use Blackbelt Smartphone Defence to fully test all of our phones and securely data wipe each device.
Tests include:
 Battery Health |
Live Call |
|
Camera/Video |
Microphones |
|
Fingerprint/Sensors |
Network Connectivity |
|
Face ID |
Screen |
|
Hardware Keys & Buttons |
Sound |
|
Jailbreak/Rooted |
Touch ID |
Description
Key Features
- Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
- Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, connector type and distance vary with model
- FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
- FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
- Duplex mode support:
- Full or half-duplex mode by auto-negotiation (TP)
- Full or half-duplex mode by DIP switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP switch: 2 DIP switches
- Rear DIP switch: FX duplex mode selection
- Side DIP switch: LFP (Link Fault Pass-through) mode selection
- IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets
Description
PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available.The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function.
LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
Specifications
| Network | |
|---|---|
| Fiber optic connector | SC |
| Auto-negotiation | Yes |
| Link Loss Carry Forward (LLCF) supported | Yes |
| Link Loss Return (LLR) supported | Yes |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX |
| Fiber ethernet cabling technology | 100BASE-FX |
| Converter input interface | 100Base-TX |
| Networking standards | IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Duplex system | Full, Half |
| Converter output interface | 100Base-FX |
| Auto MDI/MDI-X | Yes |
| Maximum data transfer rate | 100 Mbit/s |
| Technical details | |
| Housing material | Metal |
| Wavelength | 1310 nm |
| Maximum transfer distance | 15000 m |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Sensitivity | -32 dBmW |
| Tx power (min) | -20 dBmW |
| Internal | No |
| Harmonized System (HS) code | 85176990 |
| Performance | |
| Auto-negotiation | Yes |
| Wavelength | 1310 nm |
| Maximum transfer distance | 15000 m |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Sensitivity | -32 dBmW |
| Tx power (min) | -20 dBmW |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber ports quantity | 1 |
| Fiber optic connector | SC |
| DC-in jack | Yes |
| Indication | |
| LED indicators | Yes |
| Design | |
| Housing material | Metal |
| LED indicators | Yes |
| Product colour | Black |
| Certification | FCC Class A, CE Class A |
| Internal | No |
| Power | |
| Input voltage | 100 - 240 V |
| Output voltage | 5 V |
| Output current | 2 A |
| AC input frequency | 50 - 60 Hz |
| Colour | |
| Product colour | Black |
| Weight & dimensions | |
| Width | 97 mm |
| Depth | 70 mm |
| Weight | 200 g |
| Height | 26 mm |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Storage relative humidity (H-H) | 5 - 90% |
| Certificates | |
| Certification | FCC Class A, CE Class A |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
Premium (Grade A): Excellent Cosmetic Condition- May have some very minor scratches/ Scuff marks on the back and/or chassis, including general wear and tear around the ports. These mobile phones are just like new, they have minimal, if any signs of use and are fully functional. The difference between a A Grade phone and a new phone is usually the lack of the original box and/or accessories.
Great (Grade B): Good Condition- May have some minor scratches or scuffs. This grade is given to used mobile phones that carry signs of use. There is a possibility of the phone having minor scratches or scuffs on the screen and/or housing (the Back to you and me) including general wear and tear around the ports. This is a fully functional phone. Again the difference between a grade B phone and a new phone is the lack of the original box and/or accessories.
Fair (Grade C): Average Cosmetic Condition- Will have some scratch marks and or signs of use. This grade is given to used mobile phones with signs of regular use. There is a high
possibility that mobile phones of this grade will come with scratches and/or scruff marks.
We sell our phones complete with a compatible Charging lead and a Box.
This means no further items need to be purchased.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.